Full-Service Design, Remodeling & New Construction

Family Owned

/

Licensed & Certified

/

Free Estimates

Spec & investor builds · Sacramento & Roseville

Spec Home Builders in Sacramento & Roseville

GVD Builders & Construction builds new homes for investors, landowners and small developers across Sacramento and Placer counties. We design each house for the buyer most likely to make an offer, price it from the drawings, and build it under one contract.

  • Free On-Site Estimates
  • Custom Homes, ADUs & Remodels
  • Serving Greater Sacramento
  • CA Lic. #1086910

Price your next spec home

Tell us about the lot and the house you have in mind. The estimate is free.

By submitting this form, you consent to receive calls and texts from us about your project. Msg/data rates may apply. Reply STOP to opt out.

At a glance

Spec home construction with GVD Builders

What it is
A spec home is a new house built without a buyer under contract, designed to sell (or rent) when it is finished.
Who builds it
GVD Builders & Construction, a California-licensed contractor (CSLB #1086910) with its office in Roseville.
Where
Sacramento, Roseville and the surrounding communities in Sacramento and Placer counties.
Planning cost range
About $220 to $550 per square foot for construction, depending on finish level. Land, fees and financing are extra.
Typical build time
Nationally, homes built for sale averaged 7.6 months from permit to completion in 2024. Permit review comes before that.
Tools on this page
A build cost estimator and a profit and ROI calculator you can use without giving your details.

The basics

What is a spec home, and why do investors build them?

A spec home is a new house built on speculation: construction starts before there is a buyer. You choose the price point, and the house is planned for the person shopping at that price in that neighborhood.

Your return is the gap between what the house costs to build, including the land and the financing, and what a finished new home sells for on that street. Because everything is new, the buyer’s inspection has little to find, and you are not pricing in the unknowns of an older structure.

  • Two exits: sell at completion, or hold it as a new rental.
  • Construction loans are drawn in stages, so interest starts small.
  • The scope is on the plans before you commit, not behind the drywall.

Who we build for

Who hires a spec home builder

Real estate investors

You know how resale works. A ground-up build swaps the unknowns of an old house for a scope you can read on the plans before you commit.

Landowners

You hold a buildable lot or an oversized parcel. A new home turns land that earns nothing today into an asset with a market price.

Small developers

You have more than one lot in the pipeline and need a builder who prices from drawings and reports progress the same way every time.

By the numbers

What the national data says about homes built for sale

These are national averages from the National Association of Home Builders and the U.S. Census Bureau, not promises about your project. They are useful as benchmarks when you set a target margin and a schedule.

11.0%

Average builder profit on a new home

Builder profit averaged 11.0% of the sales price in the 2024 survey. It is a national average, useful as a benchmark for your own target margin.

Source: NAHB, Cost of Constructing a Home in 2024

64.4%

Share of the price that is construction

Construction made up 64.4% of the average new home price. Framing, interior finishes and the major systems were the largest pieces.

Source: NAHB, Cost of Constructing a Home in 2024

13.7%

Share of the price that is the lot

The finished lot averaged 13.7% of the sales price. If you already own the land, that part of the capital is already in place.

Source: NAHB, Cost of Constructing a Home in 2024

7.6 mo

Permit to completion, homes built for sale

Homes built for sale were the fastest type to complete in 2024, at 7.6 months after the permit was issued. Every month saved is a month less loan interest.

Source: NAHB analysis of the 2024 Census Survey of Construction

Spec home calculators

Run the numbers on your next build

Start with what the house costs to build, then test the whole deal: land, fees, loan interest, selling costs and the sale price. Example figures are filled in; replace them with your own. Nothing you type here is sent to us.

1. Spec home build cost estimator

Pick a size and a finish level to get a planning range for construction in the Sacramento and Roseville area. Land, city fees and financing are added in the deal calculator below.

1,2005,000
Finish level
Add-ons

Estimated construction range · Essential

$550k – $650k

$220 – $260 per sq ft

Base & rough construction$198k – $234k
Cabinetry & millwork$121k – $143k
Counters & finishes$110k – $130k
Plumbing & electrical$77k – $91k
Design, permits & project management$44k – $52k

Planning range only. Your written estimate is priced from your plans, your lot and your selections.

2. Spec home profit & ROI calculator

Add the lot, soft costs, loan and expected sale price to see profit, margin and return on cash for a 2,500 sq ft build.

$

Enter what you paid, or today's value if you already own it.

$/ sq ft

Following the estimator above.

$

Impact, school and utility connection fees charged on top of the build.

% of build
% of cost

Enter 0 for an all-cash build.

% / yr
months
months
$
% of price

Agent commissions and closing costs.

$

Estimated profit at sale

$101,661

Margin on sale price

9.7%

Return on cash invested

40.8%

For comparison, builder profit averaged 11.0% of the sales price in NAHB’s 2024 construction cost survey. This deal is 1.3 points below that benchmark.

Lot$180,000
Construction (2,500 sq ft)$600,000
City, school & utility fees$45,000
Contingency$30,000
Loan interest (11 months)$35,589
Selling costs$57,750
Total project cost$948,339

Cash you need

$249,339

Break-even sale price

$942,423

If you hold and rent it instead

4.6% gross rent yield on cost

Get a written estimate for this build

This calculator is a planning tool, not a quote, an appraisal or financial advice. Loan interest is estimated by assuming the loan is 55% drawn on average during construction and fully drawn until the sale closes. Taxes, insurance and utilities during the build are not included. Check the figures with your lender, agent and tax adviser.

How we work

Six stages of a spec home build

Every spec home we build goes through the same stages in the same order. The early ones cost the least and decide the most.

  1. Stage 1

    Lot review & feasibility

    We look at zoning, setbacks, utilities, slope and access, so you know what the lot can carry before money goes into drawings.

  2. Stage 2

    Design for the buyer

    The floor plan, bedroom count and finish level are chosen for the buyer most likely to shop that street at that price, not for personal taste.

  3. Stage 3

    Pricing from the plans

    Your estimate is written against the drawings and the finish schedule, so the budget you take to a lender describes the same house we build.

  4. Stage 4

    Permits & approvals

    We prepare the submittal and work through plan review with the city or county that has jurisdiction over your lot.

  5. Stage 5

    Construction

    Site work, foundation, framing, the exterior shell, mechanical systems and solar, then interiors. You get regular progress updates as each stage closes.

  6. Stage 6

    Final inspection & handover

    We close out the permit, complete the punch list and walk the finished house with you so it is ready to list or to lease.

Side by side

Build a spec home or buy a house to flip?

Both can work. They carry different risks, and the table below compares them on the points that most affect cost and resale.

PointGround-up spec homeFix-and-flip purchase
Starting pointA lot and a full set of drawingsAn existing house in its current condition
ScopeDefined on the approved plansOften grows once walls and floors are opened
LayoutDesigned around your target buyerLimited by the existing structure
Systems at listingAll newA mix of new and original
Energy codeBuilt to the current California Energy Code, including solarOnly the renovated work is brought to current code
Buyer inspectionNew work with permits and inspections on recordOlder components can trigger repair requests
Typical financingConstruction loan drawn in stagesPurchase loan or short-term renovation loan
What drives the schedulePermit review and the buildClosing, discovery and the renovation scope

Local knowledge

Where we build: Sacramento, Roseville and Placer County

Building a spec home in Sacramento

Inside city limits, permits are issued by the City of Sacramento. Unincorporated communities such as Carmichael, Fair Oaks, Orangevale and Arden-Arcade are handled by Sacramento County, which has its own review process and fee schedule.

Much of the opportunity in Sacramento is infill: a vacant lot between existing homes, an oversized parcel, or an older house that costs more to renovate than to replace. On infill lots the questions that decide the budget are utility connections, setbacks and what the zoning allows, so those come first.

Building a spec home in Roseville & Placer County

Our office is at 620 Commerce Dr in Roseville, so Placer County is home ground. The City of Roseville issues permits within city limits; unincorporated areas such as Granite Bay go through Placer County, and Rocklin, Lincoln and Loomis each run their own building departments.

Development and school fees differ from one jurisdiction to the next and can change a pro forma noticeably. We confirm the fee schedule for your specific lot before you rely on a number.

California rules that shape a spec home budget

Solar is part of the budget

California’s Energy Code has required solar on most new single-family homes since January 1, 2020. It belongs in the first draft of every spec budget.

An ADU can be built with the house

State law allows an accessory dwelling unit on a lot with a proposed single-family home, not only an existing one. A detached ADU adds a second income stream or a selling point, and ADU construction is one of our core services.

SB 9 can change what a lot is worth

Since 2022, SB 9 has allowed duplexes and lot splits on many single-family parcels, subject to conditions including an owner-occupancy requirement for lot splits. Whether it applies is a lot-by-lot question.

See the full list of cities we serve. If your lot is outside it, send us the address and we will tell you whether we can take the build on.

FAQ

Spec home questions investors ask us

What is a spec home?

A spec home (short for speculative home) is a new house that a builder or investor starts without a buyer under contract. The plan and finishes are chosen for the local market rather than for one owner, and the home is usually listed for sale as it nears completion. Some investors keep the finished house as a rental instead.

What is the difference between a spec home and a custom home?

A custom home is designed with the person who will live in it, so their preferences drive every decision. A spec home is designed for a future buyer, so each choice is weighed against what it costs and what it adds to the sale price. The construction process is the same; the difference is who makes the final call on design and what that call is based on.

How much does it cost to build a spec home in Sacramento?

As a planning range, expect roughly $220 to $550 per square foot for construction in the Sacramento and Roseville area, depending on the finish level. That figure excludes the lot, city impact and school fees, utility connections and loan interest. Size and finish level drive most of the cost, and a sloped lot or a long utility run adds site work. The estimator on this page gives a range for your size and finish level; a written estimate comes from completed drawings.

How does spec home financing work?

Most spec homes are financed with a construction loan. The lender approves the loan against the plans and a detailed budget, then releases the money in stages (called draws) as each phase of work is inspected. You pay interest only on what has been drawn, and the loan is normally repaid from the sale. Lenders usually expect the investor to put in part of the cost as equity, which can include land you already own.

How long does it take to build a spec home?

There are two parts. Permit review comes first and its length depends on the city or county. Construction follows: nationally, homes built for sale averaged 7.6 months from permit to completion in 2024, according to Census Bureau data analysed by NAHB. Larger homes and higher finish levels take longer. Ask for a projected schedule with your estimate, because every month of construction adds holding cost.

Is building a spec home a good investment?

It can be, but the margin is earned in the planning. Nationally, builder profit averaged 11.0% of the sales price in NAHB’s 2024 construction cost survey. Your result depends on what you pay for the lot, how closely the build tracks its budget and schedule, and what the finished home sells for. The risks are a softer market at completion, cost overruns and a longer sale period, which is why a contingency and a realistic time-to-sell belong in the numbers. This is general information, not financial advice.

Do I need to own a lot before I talk to a builder?

No. It often helps to talk first. We can review a lot you are considering for zoning, utilities and site conditions, and give you a planning range for the house it could carry, before you close on the land.

Can I build an ADU together with a spec home?

In most cases, yes. California law allows an accessory dwelling unit on a lot with a proposed single-family home, so the ADU can be designed and permitted with the main house. It can add rental income if you hold the property or broaden the pool of buyers if you sell.

Do you build spec homes in Roseville and Placer County?

Yes. GVD Builders & Construction is based in Roseville and builds across Placer and Sacramento counties, including Roseville, Rocklin, Lincoln, Granite Bay, Folsom, Sacramento and the surrounding communities.

Sources: NAHB, Cost of Constructing a Home in 2024; NAHB analysis of the 2024 Census Survey of Construction. Page last updated .

Bring your next lot to a Sacramento spec home builder

Send us the address or the parcel number. We will review the lot and come back with a planning range for the house it can carry.

Areas Served
Contact Us (916) 318-5192
Lic#: 1086910
Roseville Office620 Commerce Dr, Ste B
Roseville, CA 95678

Why Us

  • Free Estimates & Affordable Pricing
  • Prompt & Reliable Service
  • Locally Owned & Family-Operated
  • Trusted, Certified, & Experienced Pros
  • Fully Licensed & Certified

© 2026 GVD Builders, Inc. All Rights Reserved.Full-Service Construction & Remodeling Experts in Sacramento.